27/09/2014 10:45 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Hello all,
I am new to this forum, so pleas excuse my delays and mistakes as I still have to get hold of the required controls. My main line of modeling is Marine, and at the moment I am working on a 1:72nd scale model of the German heavy Battle Cruiser - the DKM Scharnhorst, which measures some 3260mm in length. The model is so big and complicated, that some times I have to take a break, and work on something more simple. Or at least I thought it would be. I love Italian WW2 armour, as it has a characteristic of t's own, and the wheeled vehicles, were probably the best, especially for the desert terrain.
I bought this resin model, during a scale model exhibition in Blackpool UK, where I was invited to judge the Competition models of the Marine Section.
The cost of the Resin Kit was of about Euro 140.00, and I thought that it would be a treat. And indeed it is. As I opened the box I realized that most of the resin parts are warped, and the detail leaves much to be desired, so I decided to construct from scratch all the main part of the model.
I would like to share this build with you all, as I believe that this way our hobby would be more interesting and informative.
I am still trying to figure out as how to post the pictures, so please be a bit patient for the time being.
[Modificato da Ammunition Bunker 27/09/2014 10:48] Paul Salomone
Malta
Just do it your way and never look back |
|
|
|
27/09/2014 13:33 |
|
| | | OFFLINE | Post: 5.731 | Registrato il: 29/04/2011
| Città: VERONA | Età: 27 | Mascotte di Zimmerit | |
|
Hi Paul!
The project seems interesting, do not worry about the pictures, learning how to post them has been a hard fight for all of us
I'm sorry to hear that you spent a lot of money for a low quality model, but I'm sure that your scratchbuilt improvements can give the model a good look.
If you need help for anything, just ask
Marco |
|
27/09/2014 13:49 |
|
| | | OFFLINE | Post: 684 | Registrato il: 14/09/2009
| Città: ACQUEDOLCI | Età: 54 | |
|
Auto Cannone da 90/53 su Lancia 3RO Di che marca è il kit del Lancia?
Possibile che contenga così tanti errori?
Comunque buon lavoro ed hobby |
|
27/09/2014 17:09 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Hello Marco and Challenger 1 MK3,
Thanks for browsing my log. The kit was produced by Criel Models.
Basically the errors are mainly in the thickness of the components. For example, the resin gun shield is 1.5mm thick. At a scale of 35, the thickness would be of over 40mm which is incorrect. The thickness of the gun shield would have been of 10mm to 12mm maximum, so I had to scratch build it, using 0.35mm thick styrene sheet and Evergreen profiles.
The chassis and the gun platform were warped, and the detail was rough, so I decided to scratch build those as well. the rear wheel linkages are not included in the kit, so I have to produce them as well. The engine is a total disaster and the thickness of the driver cabin walls is so out of scale, that of course, I have to built it as well. Basically, the kit is only there to be able to take the measurements. As from tomorrow, I will start posting some pictures, and you will see the difference.
Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 10:41 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Good morning to all (Buona Domenica)
I am posting some photos of the work till now.
Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 10:46 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Good morning to all (Buona Domenica)
I am posting some photos of the work till now. I have started off with the base Chassis of the Lancia 3/RO. The kit produces the resin chassis as a square section, but that s totally wrong. The Chassis was constructed from a steel channel section, so I decided to reproduce it again from scratch.
I shall be sending the second part soon.
Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 10:47 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Hello again,
I am sending the second part of the construction. But first I would like to explain something. The circular gun platform, present with this model kit is supposed to represent a steel gun platform. Some early models, which I would think the 1939 models, though were issued with a timber laminated gun platform. This was done to create a non slip gun platform. Later on during the war, the gun platforms were only made from steel, and proved to be very slippery for the gun crews. Just put in mind that the army boots had steel studs at the sole.
Here are the pictures.
[Modificato da Ammunition Bunker 28/09/2014 10:57] Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 10:48 |
|
| | | OFFLINE | Post: 8.021 | Registrato il: 21/11/2011
| |
|
Ciao.
Marino |
|
28/09/2014 10:59 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Sorry about that,
here are the pictures
Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 13:32 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Some more pictures,
Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 13:46 |
|
|
Peccato per la pessina qualità delle foto..il lavoro è molto interessante.. |
|
28/09/2014 16:20 |
|
| | | OFFLINE | Post: 131 | Registrato il: 03/09/2013
| Età: 27 | |
|
Very nice work!!
I love this vehicle, (and the lack of a styrene kit is a true pity in my opinion). |
|
28/09/2014 18:56 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Thanks Giacomer,
Italeri, produce this kit in 1:72nd scale. I expect them to issue the same in 1:35th scale very soon. Paul Salomone
Malta
Just do it your way and never look back |
|
28/09/2014 20:02 |
|
| | | OFFLINE | Post: 3.038 | Registrato il: 20/02/2011
| Città: ROMA | Età: 57 | |
|
Great work indeed! |
|
29/09/2014 07:43 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Buon giorno a tutti,
Provo a comunicare con voi in Italiano, ma non ridete, sono un fiasco totale.
Questo weekend ho fatto un po di lavoro sull cannone. basicamente, ho costruito di nuovo lo scudo dell cannone.
Ho tagliato fuori la canna del cannone, perche devo farla di nuovo. lo faro di aluminio, e' usero' il mio torno per farlo.
Ecco le foto mostrando il progresso.
Paul Salomone
Malta
Just do it your way and never look back |
|
29/09/2014 07:58 |
|
| | | OFFLINE | Post: 8.021 | Registrato il: 21/11/2011
| |
|
Ciao Paul,
bel modello... e stai facendo delle belle modifiche.
Le borchie sullo scudo, sono chiodini di modellismo navale ?
Molto bene, ti seguo...
Ciao.
Marino |
|
29/09/2014 08:09 |
|
| | | OFFLINE | Post: 104 | Registrato il: 26/09/2014
| Età: 59 | |
|
Buon Giorno Marino,
Grazie tanto per il Vostro interesse.
Allora, le borchie sono prodotti di styrene, dalla Tichy train Group USA. hanno una vasta gamma di prodotti; e' anche a prezzi veramente bassi. 2.5 dollari Americani, per un pachetto di 300 pezzi. A Malta un pachetto della CMK costa 8 Euro per aver 60 pezzi.
Qualche volta si deve cercare alrti posti per aver die buon prezzi. Paul Salomone
Malta
Just do it your way and never look back |
|
29/09/2014 11:10 |
|
| | | OFFLINE | Post: 8.021 | Registrato il: 21/11/2011
| |
|
Ammunition Bunker, 29/09/2014 08:09:
Buon Giorno Marino,
Grazie tanto per il Vostro interesse.
Allora, le borchie sono prodotti di styrene, dalla Tichy train Group USA. hanno una vasta gamma di prodotti; e' anche a prezzi veramente bassi. 2.5 dollari Americani, per un pachetto di 300 pezzi. A Malta un pachetto della CMK costa 8 Euro per aver 60 pezzi.
Qualche volta si deve cercare alrti posti per aver die buon prezzi.
Grazie...ho capito
ciao.
Marino
|
|
29/09/2014 12:52 |
|
| | | OFFLINE | Post: 1.147 | Registrato il: 29/07/2010
| Età: 47 | |
|
Awesome mate!....stai facendo veramente un bel pezzo,e complimenti anche per l'italiano é tutt'altro che fiasco totale!... _______________________________________
La vita é come un mobile da montare...ma le istruzioni sono in Lappone.... |
|
30/09/2014 10:42 |
|
| | | OFFLINE | Post: 8.292 | Registrato il: 30/06/2008
| Città: VOLPAGO DEL MONTELLO | Età: 54 | Moderatore | |
|
Paul bel lavoro di scratch!
E anche l'italiano va alla grande! Francesco
- Tutti avevano la faccia del Cristo
nella livida aureola dell'elmetto
Tutti portavano l'insegna del supplizio
nella croce della baionetta
e nelle tasche il pane dell'ultima cena
e nella gola il pianto dell'ultimo addio - Anonimo
|
|
|
|